Work out where a cove will land on your timber before you cut it. Enter the blade, the depth of cut, the fence angle and the blade tilt; the calculator draws the cross section, the top view setup and gives the fence setting measured from the fence.
| Timber left edge | - | Deepest apex point | - |
| Start cove cut (setup) | - | End cove cut location | - |
| Cove center line | - | Total opening width | - |
| Timber width (stock) | - | Timber thickness (stock) | - |
| Fence set | - |
All measurements are given from the fence (0 mm at the fence). Disclaimer: this calculator is a general reference tool only. Always verify measurements independently and test on scrap material before cutting. Cornerstone Furniture accepts no liability for injury, material loss, or errors arising from its use. Follow safe operating practices for your equipment at all times.